DHOLLANDIA
13
DH-VO.07.K9 / DH-VO.15.K9
●
LOAD RESTRAINTS
●
LIFTGATE TERMINOLOGY
See figure below page for parts corresponding to numbers in this table
#
Description
1
Platform
: carries the load during lifting and lowering. Manufactured from steel or light-weight aluminium and with a non-slip
working surface. In standard execution, the platform is equipped with a fixed leading edge. Optional cart-stops in the platform
surface, or a retention ramp at the outboard platform edge, are available as an option.
2
Cart-stops
: usually 2 load restraint flaps mounted in or just in front of the fixed leading edge of the platform. Depending on
options chosen, the cart-stops feature a manual or an automatic operation (see also §9.8 from page 49 onwards) and are
actuated by springs.
3
Rear or outboard retention ramps
: 1 full-width or 2 partial width load restraints ramps mounted at the outboard platform
edge. In travel position, the ramps lie folded back on the platform surface. When travelling up and down, the ramps can be
raised and blocked in vertical position to prevent rolling cargo on the platform from falling off. At the ground, the ramps can be
deployed as an access ramp to drive cargo on and off the platform. (See also §9.8 from page 49 onwards).
4
Side retention ramps
: 2 load restraints ramps mounted at the side edges of the platform. In travel position, the ramps lie
folded back on the platform surface. When travelling up and down, the ramps can be raised and blocked in vertical position to
prevent rolling cargo on the platform from falling off. At the ground, the ramps can be deployed as an access ramp to drive
cargo on and off the platform. (See also §9.8 from page 49 onwards)
1
2
1
3
4
4
