DHOLLANDIA
43
Depending on the start position, LOWER
or LIFT the platform to approx. 6” below
the vehicle floor level.
Make sure you comply with load charts
and instructions at all times
LOWER the platform to the ground.
LIFT the platform off the ground. At the
vehicle floor, continue to press LIFT until
you hear the hydraulic system go in
overpressure. Then, release the controls.
Closing up in travel position
ALWAYS stand on the side of the platform when
closing it.
1. Push the platform down firmly to release the
tension from the platform lock at the basis of
the lift runner. Then raise its lever.
2. If the torsion bars inside the platform are in
good working order, they will tilt up the
platform partially. Manually close the platform
further into the vertical position.
If so equipped, stow the cart-stops or
retention ramp built into the platform. The
cart-stops are operated by foot; the
retention ramp by hand.
Unless folding automatically, stow the
safety rails and lock them in their travel
position.
