47
DHOLLANDIA
Weld on inside and outside of channel
6.
Clean up the welding seams and apply adequate anti-corrosive coating to protect the body against corrosion. Check, and make
sure you comply with the instructions of the OEM vehicle manufacturer.
7.
Bolt the diagonal braces between the side steps and support channels on the body [Figure 15.4]. Fasten all bolts and locking nuts
to the required torque values.
8.
In order to avoid impact damage, it is recommended to have a minimum of 445mm ground clearance; or 10° for vehicles with
more than 3m overhang to the centre of the rear axle [Figure 15.4]. For cases with insufficient ground clearance, side steps with
a flexible bottom step are available (option ref. OAM057.LR).
Per side
2x M16x2 (8.8) 195 Nm
Figure 15.3
Summary of Contents for DH-RM.25
Page 12: ...11 DHOLLANDIA Figure 6 2...
Page 34: ...33 DHOLLANDIA Figure 11 5 Figure 11 4...
Page 46: ...45 DHOLLANDIA Figure 14 1 Figure 14 2...
Page 52: ...51 DHOLLANDIA...