Dhollandia DH-RM.25, Installation Manual, Page: 27 / 79

26
DHOLLANDIA
NOTICE

Some OEM vehicle manufacturers prohibit welding on the vehicle chassis.

Verify the body builder guidelines issued by the OEM vehicle manufacturer, and make sure you comply.
Figure 10.1

See [Figure 9.2] on page 22 for initial positioning of the mounting plates.

Slide the mounting plates sideways until they are perfectly aligned with the chassis rails. [Figure 10.1]

Straighten the mounting plates, and make sure they stand perpendicular to the lift frame. Ensure the lift frame is correctly centred
under the vehicle chassis and body. [Figure 10.1]

The mounting plates MUST be bolted to the lift frame according to the instructions in [Figure 10.2]. Tighten the
bolts and nuts with the prescribed torque.