Dhollandia DH-RM.25, Installation Manual, Page: 29 / 79

28
DHOLLANDIA
 The mounting plates are bolted to the vehicle chassis with min. 6 bolts M14 per side, supplied with the lift, spread over the widest
possible surface to maximize the strength of the bolted connection. Fasten the 6 bolts M14 per side with the required torque.
[
Figure 10.3
]
Figure 10.3
Figure 10.4
WARNING

Incorrect installation of the mounting plates and bolts can lead to accidental fall of the tail lift off the vehicle chassis.

A fall of the tail lift off the chassis can damage the tail lift and / or vehicle chassis and can cause serious bodily injury or death
to the operator and any bystanders.

Therefore, it is essential that the mounting plates are installed following the instructions of this manual.
Per side
Min. 6x M14 (10.9) 185 Nm
Per side
Extra 2x M14 (10.9) 185 Nm

Check if the long sills, the body cross members and
floor are securely attached to the chassis and will form
one solid construction once weight will be applied on
the platform. If not, attach the mounting plates of the
tail lift to the long sills on top of the chassis by means
of 2 additional bolts M14 per side, or equivalent.
[Figure 10.4]. Fasten these bolts with the required
torque.