20
DHOLLANDIA
Figure 8.3
Total extension plate
13x M14x1.5 (10.9) 185 Nm
The extension plate may also be welded to the rear sill [Figure 8.4].
1.
Tack weld the extension plate, working from the centre outward, making leveling adjustments as you proceed.
2.
Finish with 7 welds of 5mm, 102mm long on the top and bottom.
3.
DO NOT weld in the areas left and right, where the steps and dock bumpers will be bolted on.
Figure 8.4
CAUTION
Before welding, note that welding on galvanized parts releases hazardous fumes. Provide adequate ventilation,
and wear an appropriate toxic fume rated welding respirator.
It is strongly recommended to first grind off the galvanizing in areas where welding is to be done.
DO NOT weld at the sides
Summary of Contents for DH-RM.25
Page 12: ...11 DHOLLANDIA Figure 6 2...
Page 34: ...33 DHOLLANDIA Figure 11 5 Figure 11 4...
Page 46: ...45 DHOLLANDIA Figure 14 1 Figure 14 2...
Page 52: ...51 DHOLLANDIA...