3. OPERATION
Page 59
© 2008 DH Instruments, a Fluke Company
Select
<1none>
to suppress the valid key press tone.
The sound function only affects the valid key press tone. The invalid key press
tone and other RPM4-E-DWT sounds cannot be adjusted or suppressed.
3.9.5.3
<3TIME>
PURPOSE
To view and edit the RPM4-E-DWT internal time and date settings.
OPERATION
To access the TIME function
press
[SPECIAL]
,
<5prefs>
,
<3time>
.
The display is:
Edit: 1time 2date
08:32:11 am 20080125
Select
<1time>
to edit the time. Edit hours, then minutes, then am/pm by
pressing
[ENT]
after each entry. Seconds go to zero when minutes are entered.
This can be used to synchronize the time with a time standard.
Select
<2date>
to edit the date. The date must be specified in YYYYMMDD
format.
The RPM4-E-DWT date and time are set to United States Mountain Standard
Time in the final test and inspection process at the factory. If desired, use the TIME
and DATE function to set your local time and date.
3.9.5.4
<4ID>
PURPOSE
To view or edit the RPM4-E-DWT user ID and to view the RPM4-E-DWT serial
number.
OPERATION
To access the ID function press
[SPECIAL]
,
<5prefs>
,
<4ID>
.
Select
<1view>
to view the current ID.
Select
<2edit>
to edit the ID.
The ID has twelve characters. When the edit screen is opened, the cursor is on
the first character. Numerical values can be entered directly from the keypad. In
addition, the cursor control keys can be used to toggle through a list of available
alphanumeric characters. Holding the key slews through the characters.
Character order going up is: blank space, symbols, lower case letters, upper
case letters, and numbers. After selecting a character, press
[ENT]
to activate it
and move to the next character field.
When a character is selected the cursor moves to the next character. To leave a
blank character, press
[ENT]
with the field for that character blank. Use this for
the trailing characters if the ID being entered is less than twelve characters.
After the last of the twelve characters has been entered, the
<Save ID?>
option
is offered. Select
<1no>
to return to the ID edit screen. Select
<2yes>
to save the
edited ID.
