MA_ENG_REV_User Manual Revelation_REV 1508
15
Extended Option: ‘ENGINE’
With and you can select an engine and with
you can activate this engine.
will
return to the playing mode.
In the example below the example shows that the engine Toga 1.0 has been switched to Rybka 2.2.
You cannot do this during a game. Changing the engine starts a new game. If you would like to
change the engine during a game, you should leave the pieces on the board as they are after pressing
next to changing the engine. Then press
2 times to come in the SETUP BOARD menu. Press
and lift a piece of the color that should make the first move, and then press
. You can
resume your game then with a different Engine.
Extended Option: ‘ENGINE SPEED’
You can indicate to the Revelation II to use a percentage of its processing power. It can be set at
100%, 50%, 25%, 20%, 10%, 5%, 4%, 2% and 1%. At 50% it will have 1/2 of the processing power for
the engine available. At 4% only 1/25 of the processing power will be used.
Important: Please be advised that this option does not or partially work for the engines Rybka and
Baron. Please do not lower the engine speed for these engines lower than 25%.
Extended Option: ‘ENGINE OPTIONS’
Every chess engine has its own set of options. The list of possible choices differs with each engine
that is chosen in the previous page. For more information about the effect of all options you should
consult the documentation of the chosen engine. On
www.revelationII.com
you will find more
information about the various engines.
