DFSK EAGLE 580 Manual Download Page 73

Page: 73 / 190

Instrumentation and control switches

- 79 -

Bottle

Holder

And Map Bag

(Optional)

Bottle holders are located in

four doors on the inner plate.

CAUTION

Do not place a bottle with a lid

open inside the bottle holder, as the

beverage may spill out when the

door is opened or closed, or while

traveling.

Ashtray

Middle

Shield

Ashtray

(Mechanical Handbrake)

The

middle

cover

ashtray

(electronic handbrake)

Warning

Driving in order to concentrate

on driving the vehicle, where the

place is strictly prohibited to drink

bottles and cups items.

CAUTION

If the beverage holder and

other cups are placed at the cup

holder, the forward operation of the

selector

mechanism

and

the

operation of the electric button on

the front portion are obstructed.

Summary of Contents for EAGLE 580































































































































































































Search results

Summary of Contents for EAGLE 580

Reviews:

Brands by name

Popular brands

DFSK EAGLE 580, Manual

Search results

Summary of Contents for EAGLE 580

Reviews:

Brands by name

Popular brands