DFSK EAGLE 580, Manual

Page: 105 / 190

Reversing video system, heater and air conditioner, sound system
- 111 -
conditioning system due to lack of
lubrication.
Refrigeration:
This mode is used for air cooling
and dehumidification.
1. Press the inner loop button
" ".
2. Adjust the mode to " ".
3. Adjust the air volume to the
desired gear position.
4. Press the "A / C" button. (The "A /
C" indicator will light).
5. To lower the temperature, if you
want to cool as soon as possible, the
temperature can be adjusted to a
minimum.
In hot and humid conditions, you
will see from the ventilator mist, this
is because the air caused by rapid
cooling, does not indicate a failure.
Dehumidification Defogging:
This mode is used for window
defogging and air dehumidification.
1. Press the front defrost defog mode
button " " (the system
automatically turns on A / C, the
intake air is outside the loop but can
be adjusted manually).
2. Adjust the air flow to the desired
gear.
3. Adjust the temperature to the
desired position.
If the inside and outside the
temperature difference is large, it
is recommended to keep the outer
loop mode, air conditioning
humidity, should also keep the A /
C open, so as to reduce the fog of
the window glass.
Rear evaporator
To use the rear evaporator,
follow the steps below.
1. Start the engine.
2. Press the A / C switch on the
control panel on the instrument
panel (indicator light is on).
3. Press the rear blower switch