DFSK EAGLE 580 Manual Download Page 27

Page: 27 / 190

Safety devices - seats, seat belts and auxiliary restraints

- 20 -

belts are not suitable for their

small pelvis. In the event of an

accident, improper safety belts

can cause serious or fatal injury.

● always use the appropriate child

safety seats, children need adults

to help protect them. They need

suitable protection devices. The

appropriate

protection

device

depends on the size of the child's

body.

Infants

and

young

children

DFSK recommended baby or child

sitting in a child safety seat. You

should choose a child safety seat

system that fits your vehicle and your

child, and install and use it exactly as

described.

Older children

Warning

●

不

Allow the child to stand or

kneel on any seat.

● Children are not allowed in the

cargo area while the vehicle is

traveling. Children can be seriously

injured when an accident or sudden

braking occurs.

●

Children who are too large to

use child safety seats should use

seat belts while riding. If the child

takes the safety strap near the face

or neck should use the auxiliary

cushion (commercially available)

to help solve. Auxiliary cushion

Summary of Contents for EAGLE 580































































































































































































Search results

Summary of Contents for EAGLE 580

Reviews:

Brands by name

Popular brands

DFSK EAGLE 580, Manual

Search results

Summary of Contents for EAGLE 580

Reviews:

Brands by name

Popular brands