DFSK EAGLE 580 Manual Download Page 41

Page: 41 / 190

Safety devices - seats, seat belts and auxiliary restraints

- 47 -

The optional modifications

include placing items on

the steering wheel horn

cover, instrument panel, or

installing other decorative

materials around the airbag

system.

●

Operation on or around the

airbag system must be

carried out by Dongfeng

Xiaokang

authorized

service outlets. Do not use

unapproved electrical test

equipment and detection

equipment to detect the

airbag system.

●

When the secondary airbag

is detonated, a large sound will

be produced, followed by

smoke emission. The smoke is

harmless and does not cause a

fire. However, please note that

do not intentionally inhaled,

because

the

smoke

may

stimulate

people,

people

suffocation. People affected by

this smoke should immediately

breathe fresh air.

Repair And

Replacement

Procedures

Warning

● Once the airbag is detonated,

the airbag module will not work

again and must be replaced. The

airbag module must be replaced

by a service center authorized

by DFSK and the airbag module

can not be repaired after

initiation.

Summary of Contents for EAGLE 580































































































































































































Search results

Summary of Contents for EAGLE 580

Reviews:

Brands by name

Popular brands

DFSK EAGLE 580, Manual

Search results

Summary of Contents for EAGLE 580

Reviews:

Brands by name

Popular brands