DFI KD171 User Manual Download Page 27

Page: 27 / 47

www.dfi.com

Chapter 3

- BIOS Settings

KD171

CPU Configuration

Configure CPU processing related settings in this page.

InsydeH2O Setup Utility

Rev. 5.0

Help

Esc

Exit

↑/↓

Select Item

←/→

Select Item

F5/F6

Change Values

Enter

Select



SubMenu

Setup Defaults

F10

Save and Exit

Determines the action tak

en when the system power

is off and a PCI Power

Management Enable wake

up event occurs.

CPU Configuration

Intel Speed Step

Turbo mode

CPU C States

Hyper-threading

<Enabled>

Advanced

Intel Speed Step

This field is used to enable or disable the Enhanced Intel SpeedStep

Technology (EIST),

which helps optimize the balance between system’s power consumption and performance.

After it is enabled in the BIOS, EIST features can then be enabled via the operating system’s

power management.

Turbo Mode

Enable or disable turbo mode of the processor. This field will only be displayed when “Intel

Speed Step” is enabled. This field is not available when the equipped CPU does not support

Turbo Mode.

CPU C States

Enable or disable CPU Power Management. It allows CPU to go to C States when it’s not 100%

utilized.

Hyper-threading

Enable or disable Hyper-threading. When it is enabled, a physical core will perform as two

logical processors, and the user may experience better computational efficiency of the system.

Please make sure that the OS operating on your system is optimized for Hyper-Threading,

e.g. Windows and Linux. This field is not available when the equipped CPU does not support

Hyper-threading.

Video Configuration

InsydeH2O Setup Utility

Rev. 5.0

Help

Esc

Exit

↑/↓

Select Item

←/→

Select Item

F5/F6

Change Values

Enter

Select



SubMenu

Setup Defaults

F10

Save and Exit

Primary Display

Select among Auto, IGFX, PEG, and PCI Graphics devices to be the primary display.

Integrated Graphics Device

Keep IGFX enabled or disabled based on the setup options.

Initial priority :

AUTO: PEG -> PCIe -> PCI -> IGFX

IGFX: IGFX -> PEG -> PCIe -> PCI

PEG: PEG -> PCIe -> PCI -> IGFX

PCI: PCI -> PCIe -> PEG -> IGFX

Video Configuration

Primary Display

Integrated Graphics Device

Advanced

<Auto>

Primary Display

Auto

IGFX

PEG

PCI

►

Advanced

►

Advanced

Summary of Contents for KD171
















































Search results

Summary of Contents for KD171

Reviews:

Related manuals for KD171

Brands by name

Popular brands

DFI KD171, User Manual

Search results

Summary of Contents for KD171

Reviews:

Related manuals for KD171

Brands by name

Popular brands