DFI KD171 User Manual Download Page 26

Page: 26 / 47

www.dfi.com

Chapter 3

- BIOS Settings

KD171

InsydeH2O Setup Utility

Rev. 5.0

Help

Esc

Exit

↑/↓

Select Item

←/→

Select Item

F5/F6

Change Values

Enter

Select



SubMenu

Setup Defaults

F10

Save and Exit

Determines the action tak

en when the system power

is off and a PCI Power

Management Enable wake

up event occurs.

ACPI Configuration

Wake On LAN

After G3

Wake On RTC

Wake up time

<Disabled>

<Always On>

<Enabled>

[00:00:00]

Advanced

ACPI Configuration

Wake On LAN

Enable or Disable this field to allow LAN signal to power up the system.

After G3

This field is to specify what state the system should be in when power is re-applied after a

power failure.

Always On

The system automatically powers on after power failure.

Always Off

The system remains power off after power failure. Power-on signal input is

required to power up the system.

Wake On RTC

When Enabled, the system will automatically wake up from S4/S5 state at a designated time

every day via the Real-time clock (RTC) battery.

[Wake up time]

Configure the time of day the system will wake on RTC — [HH:MM:SS]. This field will only ap-

pear when “Wake On RTC” is enabled.

InsydeH2O Setup Utility

Rev. 5.0

Help

Esc

Exit

↑/↓

Select Item

←/→

Select Item

F5/F6

Change Values

Enter

Select



SubMenu

Setup Defaults

F10

Save and Exit

Support display logo with

ACPI BGRT table.

Advanced

ACPI Configuration

Wake On LAN

After G3

BGRT Logo

Wake On RTC

Wake up time

<Disabled>

<Always On>

<Enabled>

[00:00:00]

BGRT Logo

This field is used to enable or disable to support display logo with ACPI BGRT table. This field

is only available when Quiet Boot is enabled.

Note:

To enable “Quiet Boot”, please refer to the Boot menu section in this chapter for

more information.

►

Advanced

Summary of Contents for KD171
















































Search results

Summary of Contents for KD171

Reviews:

Related manuals for KD171

Brands by name

Popular brands

DFI KD171, User Manual

Search results

Summary of Contents for KD171

Reviews:

Related manuals for KD171

Brands by name

Popular brands