DFI KD171 User Manual Download Page 46

Page: 46 / 47

www.dfi.com

Chapter 5

- RAID

KD171

Step 3: Create a RAID Volume

1. When the Intel

RST option ROM status screen displays during POST, press <Ctrl> and

<I> simultaneously to enter the option ROM user interface.

2. Select 1: Create RAID Volume and press <Enter>.

3. Create a volume name and press <Enter>.

4. Use the up or down arrow keys to select the RAID level and press <Enter>.

5. Use the up or down arrow keys to select the strip size and press <Enter>.

6. Select the capacity and press <Enter>. You must select less than one hundred percent

of the available volume space to leave space for the second volume.

7. Press <Enter> to create the volume.

8. At the prompt, press <Y> to confirm volume creation.

9. Select 4: Exit and press <Enter>.

10. Press <Y> to confirm exit.

Step 3-1: Create a RAID Volume in UEFI Mode

If the boot type is set to UEFI, RAID volume creation will be different. Please use the following

steps to create RAID volumes. To set the boot type, enter the Insyde BIOS and go to “Boot” >

“Boot Type”.

1. Go to the “Advanced” menu in the Insyde BIOS and select “UEFI Device Manager”.

2. The screen displays all available drives. Select “Create RAID volume” to create a RAID

volume.

3. Use the up or down arrow keys to select the RAID level and press <Enter>.

4. Use the up or down arrow keys to scroll through the list of hard drives and press <En-

ter> to select the drive.

5. Press <Enter>.

6. Use the up or down arrow keys to select the strip size and press <Enter>.

7. Enter the volume size and press <Enter>.

8. At the prompt, press <Y> to confirm volume creation.

InsydeH2O Setup Utility

Rev. 5.0

Help

Esc

Exit

↑/↓

Select Item

←/→

Select Item

F5/F6

Change Values

Enter

Select



SubMenu

Setup Defaults

F10

Save and Exit



ACPI Configuration



CPU Configuration



Video Configuration



Audio Configuration



SATA Configuration



USB Configuration



PCI Express Configuration



ME Configuration



UEFI Device Manager



SIO NUVOTON6116D



Console Redirection

ACPI Configuration Setting

Security

Advanced

Main

Boot

Exit

►

Setup Procedure

►

Setup Procedure

Summary of Contents for KD171
















































Search results

Summary of Contents for KD171

Reviews:

Related manuals for KD171

Brands by name

Popular brands

DFI KD171, User Manual

Search results

Summary of Contents for KD171

Reviews:

Related manuals for KD171

Brands by name

Popular brands