100
3
BIOS Setup
WOL(PME#) From Soft-Off
Set this field to Enabled to wake up the system via the onboard
LAN or via a LAN card that uses the PCI PME (Power Manage-
ment Event) signal to remotely wake up the system. Access to the
LAN card will cause the system to wake up. Refer to the card’s
documentation for more information.
WOR(RI#) From Soft-Off
Set this field to Enabled to wake up the system via an external modem
or via a modem card that uses the PCI PME (Power Management
Event) signal to remotely wake up the system. Access to the modem
card will cause the system to wake up. Refer to the card’s documentation
for more information.
Power-On By Alarm
Enabled
When Enabled, you can set the time you would like the
Soft Power Down (Soft-Off) PC to power-on in the
“Time (dd:hh:mm) of Alarm” field. However, if the system
is being accessed by incoming calls or the network prior
to the time set in the field, the system will give priority
to the incoming calls or network.
Disabled
Disables the automatic power-on function. (default).
Day of Month Alarm
0
The system will power-on everyday according to the
time set in the “Time (hh:mm:ss) Alarm” field.
1-31
Select a date you would like the system to power-on.
The system will power-on on the set date, and time set
in the “Time (hh:mm:ss) Alarm” field.
Time (hh:mm:ss) Alarm
This is used to set the time you would like the system to power-on.
If you want the system to power-on everyday as set in the “Date
(of Month) Alarm” field, the time set in this field must be later than
the time of the RTC set in the Standard CMOS Features submenu.
HPET Support
The options are Enabled and Disabled.
