111
3
BIOS Setup
Min RAS# Active Time (Tras)
This field is used to select the minimum time RAS takes to read
from and write to a memory cell.
Command Per Clock (CMD)
This field is used to enable the DRAM commands and address that
will be driven for 2 clock cycles and select the second phase of the
2 clock command and address.
Bank to Bank Cmd (TRRD)
The options are Auto, 1 to 15.
Row Cycle Time (Trc)
This field is used to select the row cycle time, RAS# active or auto
refresh of the same bank.
Write Recovery Time (Twr)
This field is used to select the write recovery time when the DRAM
safely registers the last write data. This is the time from the last write
data to precharge.
Write-Read Command (TWTR)
The options are Auto, 1 to 15.
Refresh to Active (TRFC)
The options are Auto, 1 and 2.
