9 1
3
BIOS Setup
Primary IDE
This field is used to enable or disable the onboard IDE.
Primary Master PIO and Primary Slave PIO
PIO means Programmed Input/Output. Rather than have the BIOS
issue a series of commands to effect a transfer to or from the disk
drive, PIO allows the BIOS to tell the controller what it wants and
then let the controller and the CPU perform the complete task by
themselves. Your system supports five modes, 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select
the best available mode after checking your drive.
Auto
The BIOS will automatically set the system according
to your hard disk drive’s timing.
Mode 0-4
You can select a mode that matches your hard disk
drive’s timing. Caution: Do not use the wrong setting
or you will have drive errors.
IDE Function Setup
The settings on the screen are for reference only. Your version may not be
identical to this one.
Primary IDE
Primary Master PIO
Primary Slave PIO
Primary Master UDMA
Primary Slave UDMA
IDE DMA Transfer Access
IDE Prefetch Mode
IDE HDD Block Mode
Phoenix - AwardBIOS CMOS Setup Utility
IDE Function Setup
Item Help
Menu Level
XX
↑↓→←
: Move
Enter: Select
F1: General Help
+/-/PU/PD: Value
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Enabled
Auto
Auto
Auto
Auto
Enabled
Enabled
Enabled
