DFI CS631-C246/Q370 User Manual Download Page 38

Page: 38 / 79

User's Manual |

CS631

Chapter 3

BIOS SETTINGS

→←: Select Screen

↑↓: Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Advanced

Power & Performance

Allows more than two fre

quency ranges to be sup

ported.

Power & Performance

Intel(R) SpeedStep(tm)

Turbo Mode

C states

[Enabled]

Advanced

Intel(R) SpeedStep(tm)

This field is used to enable or disable the Intel SpeedStep

Technology, which helps optimize

the balance between system’s power consumption and performance. After it is enabled in the

BIOS, EIST features can then be enabled via the operating system’s power management.

Turbo Mode

Enable or disable turbo mode of the processor. This field will only be displayed when EIST is

enabled.

C states

Enable or disable CPU Power Management. It allows CPU to enter "C states" when it’s idle and

nothing is executing.

→←: Select Screen

↑↓: Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Advanced

PCH-FW Configuration

ME State

When this field is set to Disabled, ME will be put into ME Temporarily Disabled Mode.

Manageability Features State

Enable or disable Intel(R) Manageability features. This option disables/enables Manageability

Features support in FW. To disable, support platform must be in an unprovisioned state first.

AMT BIOS Features

When disabled, AMT BIOS features are no longer supported and user is no longer able to ac-

cess MEBx Setup. This option does not disable manageability features in FW.

ME Unconfig on RTC Clear

When disabled, ME will not be unconfigured on RTC Clear.

Advanced

ME State

Manageability Features State

AMT BIOS Features

►

AMT Configuration

ME Unconfig on RTC Clear

►

Firmware Update Configuration

[Enabled]

[Enabled]
[Enabled]

When Disabled ME will be

put into ME Temporarily

Disabled Mode.

Note:

The sub-menus are detailed in following sections.

Summary of Contents for CS631-C246/Q370
















































































Search results

Summary of Contents for CS631-C246/Q370

Reviews:

Related manuals for CS631-C246/Q370

Brands by name

Popular brands

DFI CS631-C246/Q370, User Manual

Search results

Summary of Contents for CS631-C246/Q370

Reviews:

Related manuals for CS631-C246/Q370

Brands by name

Popular brands