DFI CS631-C246/Q370 User Manual Download Page 22

Page: 22 / 79

User's Manual |

CS631

Chapter 2

HARDWARE INSTALLATION

RJ45 LAN

The two LAN ports allow the system board to connect to a local area network.

BIOS Setting

Configure the onboard LAN ports in the Advanced menu (“ACPI Configuration” submenu) of the

BIOS. Refer to the chapter 3 for more information.

Driver Installation

Install the LAN drivers. Refer to the chapter 4 for more information.

Features

•

1 Intel

I211AT PCIe Gigabit Ethernet LAN Controller

•

1 Intel

I219LM LAN PHY with iAMT12.0 (only Xeon/Core i7/i5 supports iAMT)

Rear I/O Ports

LAN 1

LAN 2

The system board is equipped with three rear audio jacks:

• Line-in Jack (Light Blue), optional

This jack is used to connect any audio devices such as Hi-fi set, CD player, tape player,

AM/FM radio tuner, synthesizer, etc.

• Line-out Jack (Lime)

This jack is used to connect a headphone or external speakers.

• Mic-in Jack (Pink)

This jack is used to connect an external microphone.

For the internal Front Audio connector, please refer to the next section.

BIOS Setting

Configure the onboard audio port in the Advanced menu (“Audio Configuration” submenu) of

the BIOS. Refer to chapter 3 for more information.

Driver Installation

Install the audio driver. Refer to Chapter 4 for more information.

Audio

Rear I/O Ports

Line-out

Mic-in

Summary of Contents for CS631-C246/Q370
















































































Search results

Summary of Contents for CS631-C246/Q370

Reviews:

Related manuals for CS631-C246/Q370

Brands by name

Popular brands

DFI CS631-C246/Q370, User Manual

Search results

Summary of Contents for CS631-C246/Q370

Reviews:

Related manuals for CS631-C246/Q370

Brands by name

Popular brands