DFI CS631-C246/Q370 User Manual Download Page 70

Page: 70 / 79

User's Manual |

CS631

Chapter 5

RAID

Step 4: Install the Intel Rapid Storage Technology Utility

The Intel Rapid Storage Technology Utility can be installed from within Windows. It allows RAID

volume management (create, delete, migrate) from within the operating system. It will also dis-

play useful SATA device and RAID volume information. The user interface, tray icon service and

monitor service allow you to monitor the current status of the RAID volume and/or SATA drives.

It enables enhanced performance and power management for the storage subsystem.

Step 3: Create a RAID Volume

1. Go to the “Advanced” menu of the AMI BIOS and select “Intel(R) Rapid Storage Technol-

ogy”.

2. The screen displays all available drives. Select “Create RAID volume” to create a RAID

volume”.

3. Use the up or down arrow keys to select the RAID level and press <Enter>.

4. Use the up or down arrow keys to scroll through the list of hard drives and press <En-

ter> to select the drive.

5. Press <Enter>.

6. Use the up or down arrow keys to select the strip size and press <Enter>.

7. Enter the volume size and press <Enter>.

8. At the prompt, press <Y> to confirm volume creation.

→←: Select Screen

↑↓: Select Item

Enter: Select

+/- : Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Security

Chipset

Boot

Save & Exit

Main

Advanced

RC ACPI Settings

CPU Configuration

Power & Performance

PCH-FW Configuration

Trusted Computing

NCT6116D Super IO Configuration

NCT6116D HW Monitor

Serial Port Console Redirection

USB Configuration

Network Stack Configuration

CSM Configuration

Intel(R) Rapid Storage Technology

System ACPI Parameters.

Summary of Contents for CS631-C246/Q370
















































































Search results

Summary of Contents for CS631-C246/Q370

Reviews:

Related manuals for CS631-C246/Q370

Brands by name

Popular brands

DFI CS631-C246/Q370, User Manual

Search results

Summary of Contents for CS631-C246/Q370

Reviews:

Related manuals for CS631-C246/Q370

Brands by name

Popular brands