28
Universal Serial Bus Connectors
The C586HX system board is equipped with two USB connectors on
locations JP1 and JP2 on the system board. USB allows data exchange
between your computer and a wide range of simultaneously accessible
peripherals.
Connecting the USB Ports
As an option, one card-edge bracket mounted with two USB port cables
may be provided with the system board. Connect the USB port cables
to connectors JP1 and JP2 on the system board. Make sure the red
wires of the USB cables are aligned with pin 1 of connectors JP1 and
JP2. Mount the card-edge bracket to the system chassis.
USB port cables (optional)
Note:
Make sure “USB Controller” in the Integrated Peripherals setup of the
Award BIOS is Enabled.
Using C586HX with CD-ROM Drives
Important:
If you encountered problems while using an ATAPI CD-ROM drive that
is set in Master mode, please set the CD-ROM drive to Slave mode.
Some ATAPI CD-ROMs may not be recognized and cannot be used if
incorrectly set in Master mode.
