47
You may not use IrDA (J9) and the COM 2 serial port (J3) at the same
time. If you are using the COM 2 serial port, set “Onboard UART 2
Mode” to Standard.
Uses the COM 2 serial port.
HP mode IrDA.
SHARP mode IrDA.
Standard
HPSIR
ASKIR
Onboard Parallel Port
Selects the I/O address and IRQ for the onboard parallel port.
Disables the onboard parallel port.
378H/IRQ7
3BCH/IRQ7
278H/IRQ5
Disabled
Parallel Port Mode
Selects the parallel port mode according to the type of printer
device connected to your onboard parallel port.
Normal
EPP
ECP
ECP+EPP
Supervisor Password
If you want to protect your system and setup from unauthorized entry,
set a supervisor’s password with the “System” option selected in the
BIOS Features Setup.
If you want to protect access to setup only, but not your system, set a
supervisor’s password with the “Setup” option selected in the BIOS Fea-
tures Setup. You will not be prompted for a password when you cold
boot the system.
Use the arrow keys to highlight the “Supervisor Password” option and
press <Enter>. The message below will appear.
Enter Password:
