40
Power Management Setup
Power Management Setup allows you to configure your system to most
effectively save energy.
Power Management
This category allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before each of the
following modes are activated: Doze Mode, Standby Mode, and Sus-
pend Mode.
No power management. Disables the Doze, Standby and
Suspend modes.
Minimum power management. Doze Mode = 1 hr., Standby
Mode = 1 hr., and Suspend Mode = 1 hr.
Maximum power management. Doze Mode = 1 min.,
Standby Mode = 1 min., and Suspend Mode = 1 min.
Allows you to set each mode individually. When enabled,
each option ranges from 1 min. to 1 hr.
Disable
(default)
Min. Power
Saving
Max. Power
Saving
User
Defined
PM Control by APM
An Advanced Power Management device will be activated to
enhance the Max. Power Saving mode and stop the CPU’s
internal clock. (default)
The system BIOS will ignore APM when initiating the Power
Management mode.
Yes
No
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management
PM Control by APM
Video Off Method
MODEM Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
: Disabled
: Yes
: V/H SYNC+Blank
: 3
: Disabled
: Disabled
: Disabled
: Disabled
** Power Down & Resume Events **
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10(Reserved)
IRQ11(Reserved)
IRQ12 (PS2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
: On
: On
: On
: On
: On
: Off
: On
: On
: On
: On
: On
: On
: Off
ESC
F1
F5
F6
F7
:Quit
:Help
:Old Values
:Load BIOS Defaults
:Load Setup Defaults
↑↓→ ←
PU/PD/+/-
(Shift) F2
:Select Item
:Modify
:Color
** Wake Up Events In Doze & Standby **
IRQ3 (Wake-Up Event)
IRQ4 (Wake-Up Event)
IRQ8 (Wake-Up Event)
IRQ12 (Wake-up Event)
: On
: On
: On
: On
