23
Jumper Settings for CMOS Clear
Jumper JP8
CMOS Clear
If, for some reason, the CMOS becomes corrupted, the system can be
reconfigured with the default values stored in the ROM BIOS. To load
the default values, power off your system and set JP8 to On. Then
power on your system for 5 seconds and turn it off again. Set JP8 back
to its default setting, Off.
Off: Normal (default)
On: CMOS Clear
Jumper Settings for Display
Jumper JP4
Display Type Select
Jumper JP4 sets the display adapter to color or mono. This jumper
must match the type of display adapter installed. If you change your
video adapter, make sure this jumper is changed accordingly.
1
3
2
1
3
2
2-3 On: Mono
1-2 On: Color (default)
inches. All cables (for floppy drive, hard drive, CD-ROM, etc.) must be
routed clear of the CPU and its airspace.
Fan Exhaust
The CPU must be kept cool by using a fan with heatsink. The tempera-
ture of the air entering the fan/heatsink cannot exceed 45
o
C (113
o
F).
The ambient or room temperature must be below 37
o
C (99
o
F).
