DFI 686IPK, User Manual

Page: 8 / 78

8
Chapter 2
Hardware Installation
This chapter summarizes the steps to install the 686IPK system board
into your system unit. It also includes a description of the area in which
you must work and directions for processor and memory installation.
Before installing the system board, carefully read the Installing the Sys-
tem Board section for proper installation procedures.
Preparing the Area
Before unpacking the system board, make sure the location you have
selected is relatively free of dust and static electricity. Excessive expo-
sure to dust, static electricity, direct sunlight, excessive humidity, ex-
treme cold, and water can damage the operational capabilities of your
system board. Place the system board on a workbench (not in a chas-
sis). Avoid placing the unit on surfaces such as carpeted floors. These
areas also attract static electricity which can damage some circuits on
your system board.
Make sure the power source has a properly grounded, three-pronged
socket. It is essential that the power connection be properly grounded
for correct functioning of your system board. For further protection, we
recommend that you use a surge suppressor. This will protect the sys-
tem board from damage that may result from a power surge on the
electrical line.
Move items that generate magnetic fields away from your system board
since magnetic fields can also damage your system board. Once you
have selected the ideal location, unpack the 686IPK system board care-
fully.
Handling the System Board
It is quite easy to inadvertently damage your system board even before
installing it in your system unit. Static electrical discharge can damage
computer components without causing any signs of physical damage.
You must take extra care in handling the system board to ensure
against electrostatic build-up.