DFI 686IPK, User Manual, Page: 14 / 78

14
SIMMs
1MBx32/x36
2MBx32/x36
4MBx32/x36
8MBx32/x36
16MBx32/x36
32MBx32/x36
Memory Size
4MB
8MB
16MB
32MB
64MB
128MB
The table on the next page summarizes the bank locations and mod-
ules needed for the corresponding memory sizes.
System Memory
The SIMM (Single In-line Memory Module)
sockets are divided into two banks on the
system board, Bank 0 and Bank 1. Each
bank consists of 2 SIMM sockets. You will
need either 2 or 4 pieces of SIM modules,
depending on the amount of memory you
intend to install. Make sure you insert the
same type of SIMMs in one bank.
You can install SIMMs in either of the banks, Bank 0 or Bank 1, but you
must populate one bank first before going to the next bank.
The 686IPK system board can support 8MB to 512MB of memory using
1MBx32/x36, 2MBx32/x36, 4MBx32/x36, 8MBx32/x36, 16MBx32/x36 or
32MBx32/x36 72-pin SIMMs. The table below shows the supported SIM
modules and their corresponding memory sizes.