DFI 686IPK, User Manual, Page: 19 / 78

19
5. Tighten the captive nuts to stabilize the Retention Mechanism.
3. Hold the Retention Mechanism upright and position it above the
Intel
®
Slot 1 connector.
4. Slide the Retention Mechanism downward so that the rectangular
hole at the center of the Retention Mechanism fits onto the connec-
tor. The captive nuts located on both ends of the Retention Mecha-
nism will also fit over the threaded studs of the Retention Mecha-
nism Attach Mount.
Note:
The holes on the upper sides of the Retention Mechanism (where
the latches of the processor locks) should be facing toward the Intel
chips.