DFI 686IPK, User Manual

Page: 59 / 78

59
2. The default setting of the “ Modem Ring-on” option is disabled. If
you wish to remotely access your computer, set this option to COM
A, COM B or COM A & B. This will depend on the COM port where
your modem is connected.
3. Enable Power Management. This will allow your system to enter the
Suspend mode after you have finished accessing data. Refer to the
Power Management Setup section for more information.
Supervisor Password
If you want to protect your system and setup from unauthorized entry,
set a supervisor’s password with the “System” option selected in the
BIOS Features Setup.
If you want to protect access to setup only, but not your system, set a
supervisor’s password with the “Setup” option selected in the BIOS Fea-
tures Setup. You will not be prompted for a password when you cold
boot the system.
Use the arrow keys to highlight the “Supervisor Password” option and
press <Enter>. The message below will appear.
Enter Password:
Type in the password. You are limited to eight characters. When done,
the message below will appear:
Confirm Password:
You are being asked to verify the password. Type in exactly the same
password. If you type in a wrong password, you will be prompted to
enter the correct password again.
To delete or disable the password function, highlight “Supervisor Pass-
word” and press <Enter>, instead of typing in a new password. Press
the <Esc> key to return to the main menu.