DFI 686IPK, User Manual

Page: 50 / 78

50
ROM PCI/ISA BIOS
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management
PM Control by APM
Video Off Method
Modem Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
** Wake Up Events In Doze & Standby **
IRQ3 (Wake-Up Event)
IRQ4 (Wake-Up Event)
IRQ8 (Wake-Up Event)
IRQ12 (Wake-Up Event)
: Disable
: Yes
: V/H SYNC+Blank
: 3
: Disabled
: Disabled
: Disabled
: Disabled
: On
: On
: On
: On
** Power Down & Resume Events **
IRQ3
(COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
: On
: On
: On
: On
: On
: On
: Off
: On
: On
: On
: On
: On
: On
: On
: Off
ESC
F1
F5
F6
F7 : Quit
: Help
: Old Values
: Load BIOS Defaults
: Load Setup Defaults
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
↑ ↓ → ←
Power Management Setup
The Power Management Setup allows you to configure your system to
effectively save energy.
Power Management
This category allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before each of the
following modes are activated: Doze Mode, Standby Mode, and Sus-
pend Mode.
No power management. Disables all four modes.
Minimum power management. Doze Mode = 1 hr., Standby
Mode = 1 hr., Suspend Mode = 1 hr. and HDD Power Down =
15 min.
Maximum power management. Doze Mode = 1 min., Standby
Mode = 1 min., Suspend Mode = 1 min. and HDD Power
Down = 1 min.
Allows you to set each mode individually. When enabled, each
option ranges from 1 min. to 1 hr.
Disable
(default)
Min.
Saving
Max.
Saving
User
Define