62
Note:
If you do not copy files of Win95 to Drive C first, CD-ROM will not be
found while it installs to printer and the installation will be stopped. This
is because the versions of Win95, Win95+, Win95 OSR1, Win95 OSR2
and Win95 OSR2.1 do not include some new hardware drivers within TX
chipset.
Solve Warning Messages with Windows 95 IDE
If the version of Windows 95 under your IDE is one of the Win95 OSR2
or Win95 OSR2.1, there may be some warning messages appearing
while you boot up your system. This problem occurs for Win95 has not
recognized the TX chipset on the 586ITB board. To change files for
Win95 by knowing TX chipset, you may need to change some filies in
Win95. Please follow setps shown below.
1. Insert the IDE driver into Drive A.
2. Enter Win95 MS-DOS prompt window.
3. Type "CD windows" and press "Enter". (C:\windows>)
4. Type "CD INF" and press "Enter". (C:\windows\INF>)
5. Change "MSHDC.INF", "MACHINE.INF" and "USB.INF" to
"MSHDC.000", "MACHINE.000" and "USB.000".
Ex: C:\windows\INF>copy MSHDC.INF MSHDC.000
C:\windows\INF>copy MACHINE.INF MACHINE.000
C:\windows\INF>copy USB.INF USB.000 (only Win95 OSR2.1)
Files
1. MSHDC.INF
2. MACHINE.INF
1. MSHDC.INF
2. MACHINE.INF
3. USB.INF
Version
OSR2
OSR2.1
