47
Resume by Ring (for ATX power supply only)
Set “Resume by Ring” to COM 1or COM 2. This will depend on the
COM port where your modem is connected. Refer to pages 25 and 26
for detailed information.
Resume by Alarm (for ATX power supply only)
This category allows you to set the day and time of resumption for your
computer automatically.
Enabled
Disabled
Enables to set the alarm time. When setting Enabled, you can
set the day and time with the next two showing items of the
Resume by Alarm. Set the IRQ 8 Clock Event under Break
Event From Suspend to Enabled when selecting this option.
Disables to set the alarm time. (default)
Break Event From Suspend and Reload Global Timer Events
These are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a
mode. In effect, the system remains alert for anything which occurs to a
device which is configured as enabled, even when the system is in a
power saving mode.
When an I/O device wants to gain the attention of the operating system,
it signals this by causing an IRQ to occur. When the operating system
is ready to respond to the request, it interrupts itself and performs the
service.
PNP/PCI Configuration
This section describes configuring the PCI bus system. It covers some
very technical items, and it is strongly recommended that only experi-
enced users make any changes to the default settings.
