61
Keyboard error or no keyboard present
Cannot initialize the keyboard. Make sure the keyboard is attached
correctly and no keys are being pressed during the boot.
Manufacturing POST loop
System will repeat POST procedure infinitely while the keyboard con-
troller is pull low. This is also used for the M/B burn in test at the fac-
tory.
BIOS ROM checksum error - System halted
The checksum of ROM address F0000H-FFFFFH is bad.
Memory test fail
The BIOS reports memory test fail if the memory has error(s).
Driver Installation
To install the IDE drivers supported by the 586ITB system board,
please refer to the “Readme” file contained in the provided diskette for
detail information.
All steps or procedures to install software drivers are subject to change
without notice as the softwares are occassionally updated. Please refer
to the readme files for the latest information.
Windows
95 OS Installation
If this is the first time for you to install Windows
95 to your PC system
with one of the the following versions: Win95, Win95+, Win95 OSR1
(Windows 95 OEM Service Release 1), Win95 OSR2 (Windows 95
OEM Service Release 2.0) and Win95 OSR2.1 (Windows 95 OEM Ser-
vice Release 2.0 plus USB Supplement), please follow steps shown be-
low to install.
1. Copy the Cab files of Win95 within Win95 CD to Win95 under Drive
C first.
2. Go into Win95 under Drive C. (C:\windows>)
3. Type "Setup" and press "Enter" to start installing Win95.
