54
If you selected EPP, “EPP Mode Select” will appear. This option applies
to standard specification. The options are EPP1.9 and EPP1.7. Default
setting: EPP1.7.
If you selected ECP, “ECP Mode Use DMA” will appear. This is used to
select a DMA channel for the parallel port. The options are 1 and 3.
Default setting: 3.
If you selected ECP+EPP, “ECP Mode Use DMA” and “EPP Mode Se-
lect” will both appear on the screen.
Supervisor Password
If you want to protect your system and setup from unauthorized entry,
set a supervisor’s password with the “System” option selected in the
BIOS Features Setup.
If you want to protect access to setup only, but not your system, set a
supervisor’s password with the “Setup” option selected in the BIOS Fea-
tures Setup. You will not be prompted for a password when you cold
boot the system.
Use the arrow keys to highlight the “Supervisor Password” option and
press <Enter>. The message below will appear.
Enter Password:
Type in the password. You are limited to eight characters. When done,
the message below will appear:
Confirm Password:
You are being asked to verify the password. Type in exactly the same
password. If you type in a wrong password, you will be prompted to
enter the correct password again.
To delete or disable the password function, highlight “Supervisor Pass-
word” and press <Enter>, instead of typing in a new password. Press
the <Esc> key to return to the main menu.
