English
English
5
4
WARNING:
Always select the proper tool lanyard
or attachment for the job. Ensure its rating matches
or exceeds item being attached.
WARNING:
Inspect tool and lanyard before each
use for damage and proper function (including
fabric and stitching). Do not use if damaged or not
functioning properly.
WARNING:
Tool lanyards or similar products are
never to be used as Personal Protective Equipment
(PPE). Never use any tool lanyard or their
subcomponents beyond their individual capacity
rating.
WARNING:
Do not alter or use in a manner other
than as instructed in this manual.
WARNING:
This product is not serviceable.
If damaged or not functioning properly, replace
before resuming work.
WARNING:
Do not attach more than one Tool
to each Lanyard (or lanyard leg).
WARNING:
Dropped tools will swing on the
lanyard, which could cause injury or loss of balance.
a ) Choosing the attachment point on the tool.
b ) Choosing the lanyard connector.
c ) Choosing the anchor point.
TOOL ATTACHMENTS
Fundamental steps:
Choosing the attachment point on the tool:
TOOL TAPE DXDP810100
CAUTION:
On some occasions the tools a user has to
carry for specific work at all heights do not come with built-
in or prescribed attachment options for the tool lanyard
connection. The D
E
WALT range of tool attachments are the
perfect solution for such cases and help provide a secure
connection for the tool lanyard in the tethering system.
Different tools will require different tethering system
components depending on their shape and weight. Do not
use the tethering system for pulling or towing objects.
a ) This may be a hole on the handle or on the body of the
tool. Alternatively, the body of the tool may serve as an
attachment point.
b ) If the above options are not available, the attachment
point may be created on the tool directly.
c ) Use only with tools that are specifically designed for
tethering, or by using appropriate
D
E
WALT
attachment
accessories. NEVER modify tools to create attachment points.
Do not attach to a tool in a way that keeps guards, switches
or lock-offs from operating properly.
d ) Make sure the taping area of the tool is free of sharp edges.
SPECIFICATION OF THE TAPE:
Yellow in Color
Roll is 1“ wide by 12‘ long
( 2.54 cm by 365.75 cm)
USAGE COMPATABILITY:
Always use
with the attachment swivel D-ring applied and stretch
lanyard for connecting the tool. ( e.g.
DXDP710411
). Note: Maximum
tool load for this type of attachment ( Tool Atta Self-Merging
Rubber Tape): 3 lbs./1.36 kg.
CORRECT
INCORRECT
WARNING:
Never cut the tape
on top of the lanyard, it could
weaken the structure of the
lanyard resulting in an accident.
Folded end must face up.
WARNING:
Always select the proper attachment
or lanyard for the job. Ensure its rating matches or
exceeds item being attached.
15” expanded, 11” relaxed
15” expanded, 11” relaxed
2.5”
4.5”
5.1”
6.2”
8.5”
6.5”
6”
6”
Polyester,Steel
Polyester,Polymer
Polyester,Steel
Polyester,Steel
Polyester,Steel
Polyester,Steel
Polyester,Steel
Polyester,Steel
PU,Steel
PU,Steel
15 lbs
5 lbs
3 lbs
3 lbs
3 lbs
3 lbs
3 lbs
5 lbs
2 lbs
3 lbs
Cinch Loop Attachment
Wire Tool Attachment
Wire Tool Attachment
Tool Attachment with Swivel D-Ring
Tool Attachment with Swivel D-Ring
Tool Attachment with Swivel D-Ring
Tool Attachment with Swivel D-Ring
Tool Attachment with Swivel D-Ring
Elastic Tool Attachment with Swiveling D-Ring
Quick Connect Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
12’
Silicone
N.A.
Tool Tape
DXDP710140
DXDP710211
DXDP710411
DXDP710422
DXDP710433
DXDP710444
DXDP710455
DXDP710600
DXDP710700
DXDP710710
DXDP810100
12.5”
12.5”
12.5”
Polyester,Steel
Polyester,Steel
Polyester,Steel
Polyester,Steel
21.6”
35 lbs
35 lbs
35 lbs
V-Ring Tool Attachment (double wing)
V-Ring Tool Attachment (double wing)
V-Ring Tool Attachment
V-Ring Tool Attachment (single wing)
80 lbs
Tool Attachment
Tool Attachment
Tool Attachment
Tool Attachment
DXDP710221
DXDP710222
DXDP710200
DXDP710201
Product Code
Category
Rating
Length
Material
Product Name
TECHNICAL SPECIFICATIONS TABLE
Positioning Swivel D-ring/connection point of tool
attachment:
a ) When
installing the swivel
D-ring make sure of its
placement so it can pivot freely.
b ) Fix
the attachment swivel
D-ring to the tool using self-
merging rubber tape.
c ) This tape
is Self-Processing and doesn't rely on
chemical adhesives.
d ) It is
water, oil and heat resistant.
e ) It provides
long lasting adhesion
f ) No
heat or additional precess required
WARNING:
Only use appropriate D
E
WALT brand
attachment accessories. NEVER modify tools to
create attachment points.
