manualshive.com logo in svg

DeVilbiss Drive HYB/POWER, Instructions For Use Manual

Share
Download
DeVilbiss Drive HYB/POWER Instructions For Use Manual Download Page 4

4    

|

    Drive DeVilbiss Healthcare Ltd    

|

    Hybrid-Power   

|

    Instructions for use    

|

    2021-01    rev7

1.

 Contact Information

Thank you for purchasing this product. This user manual 
should be read carefully before using the mattress. Please 
ensure that you understand all instructions, if you have 
any questions concerning the operation or maintenance 
of the mattress please contact your local distributor or 
Drive DeVilbiss Healthcare Ltd.

Contact Information

For any service, warranty, sales or customer 
service information on this product please 
contact your local distributor or if in doubt 
contact Drive DeVilbiss Healthcare Ltd. at the  
following address: 

Drive DeVilbiss Healthcare Ltd. 
Sidhil Business Park
Holmfield
Halifax
West Yorkshire
HX2 9TN
United Kingdom

Service & Maintenance 
Tel: +44 (0)1422 233 136  
Fax: +44 (0)1422 233 010 

Spares
Tel: +44 (0)1422 233 138 

Customer Service
Tel:   +44 (0) 845 0600 333  
Fax:  +44 (0) 845 0600 334

[email protected] 
www.drivedevilbiss.co.uk

Please reference the product name and serial 
number. Serial numbers can be found in the 
following locations:

• 

Rear of the control unit

• 

Mattress top cover

Any serious incident that has occurred in 
relation to the device should be reported to the 
manufacturer and the competent authority of 
your Member State.

For Service & Support outside the United 
Kingdom, please contact the local distribution 
company from where this equipment was 
purchased. Failure to do so may result in the 
manufacturer’s warranty becoming void.

Users with visual, reading or cognitive disabilities 
should seek advice from their provider or a 
professional care provider for an appropriate 
format. For the latest version of this document, 
contact Drive DeVilbiss Healthcare Ltd using the 
details below, or check our website.

Summary of Contents for Drive HYB/POWER





























Reviews:

No comments

Brands by name

Popular brands

Load more brands