DeVilbiss Drive HYB/POWER, Instructions For Use Manual

Page: 22 / 28

22 | Drive DeVilbiss Healthcare Ltd | Hybrid-Power | Instructions for use | 2021-01 rev7
16. Specification
Mattress Specification Pump Specification
Power Supply: 220-240V,
50/60Hz, 0.25A 16W
Fuse Rating: T1A 250V
Cycle Time: 10 minutes
Dimensions: 310 x 210 x 125mm
Weight: 2.5kg
Modes: Alternating & Static
Air Output: 8 litres per minute
Pressure Range: 15mmHg - 40mmHg
±10%
Noise Level: <30dB
Electric Protection: Class II
Applied Parts: Type BF
Medical Device: Class I (Mattress)
Class IIa (Control Unit)
Usage: Continuous operation
Ingress Protection: IP21
Environment
Operating:
Ambient Temp:
+10°C to +35°C
Humidity:
20% to 80%
non-condensing
Environment
Transport & Storage:
Temperature:
-15°C to +70°C
Humidity:
10% to 90%
non-condensing
User Weight: Maximum: 254kg
(40st)
Dimensions: 1980x 880 x 160mm
(fully inflated)
Weight: 16kg
Cells: 14 foam filled cells
single cell formation
14 alternating
1 static foam head cell
Therapy Mode: 1 in 2
UV: Indoor use only
Cover Material: PU coated fabric
substrate
Base Material: PU coated fabric
substrate
Ignitability Testing: Cover complies
with BS7175:1989 -
Medium Hazard
Expected Service
Life:
5 years*
Not suitable for use in the presence of
flammable anaesthetic mixtures with air, oxygen
or nitrous oxide (Not AP or APG equipment)
*If the system and its components are serviced
and maintained in accordance with the
information detailed in section 14 of these
instructions for use then the mattress system can
be expected to provide in excess of 10 years of
service.