DeVilbiss Drive HYB/POWER, Instructions For Use Manual

Page: 21 / 28

Drive DeVilbiss Healthcare Ltd | Hybrid-Power | Instructions for use | 2021-01 rev7 | 21
• The mattress system is to
be decontaminated before
disposal to avoid risk of cross
contamination.
When the electrical system has come to the
end of its useful life, contact your provider or
Drive DeVilbiss Healthcare Ltd. to arrange for
collection, alternatively follow local recycling
and WEEE (Waste Electrical and Electronic
Equipment) policies.
The control unit used with the mattress system
is not to be disposed of in general municipal
waste. Some of the electrical components could
be harmful to the environment and where viable
the components can be recovered and reused/
recycled.
The metal and plastic components used in
both the mattress and control unit are also to
be separated and disposed of following local
recycling policy as these can also be recovered
and reused/recycled.
15. Disposal of Parts
14.4 Service Life
It is advised that the system is serviced in
conjunction with the systems environment.
For more detailed service information, spare
parts, circuit diagrams etc. please refer to the
service manual. Copies are available from Drive
DeVilbiss Healthcare Ltd. Contact details can be
found in section 1.
14.5 Control Unit - Filter
Dust from the surrounding environment can
effect the performance of the control unit.
Check that the air filter is in good condition and
replace or clean as required.
• Should the Control Unit fail to
operate, a suitable fuse of the
same rating and a replacement
Mains Cable supplied by Drive
DeVilbiss Healthcare Ltd should
be fitted by Service Personnel
only. Failure to fit the correct
fuse or mains cable could result
in damage to the control unit
and a fire hazard.