DeVilbiss Drive HYB/POWER, Instructions For Use Manual

Page: 10 / 28

10 | Drive DeVilbiss Healthcare Ltd | Hybrid-Power | Instructions for use | 2021-01 rev7
6. Transport and Post-delivery
6.1 Transporting
Where possible, it is recommended the transport
of mattresses should be carried out within a
holdall on a flat based trolley or mattress trolley.
Do not drag or pull the mattress by its cover.
Please follow local moving and handling policies
and guidelines when handling the mattress.
6.2 Storage
For ease of storage, mattresses should be stored
in a storage rack. To prevent damage during
storage:
•
Ensure mattress is cleaned before storing.
• Store in a polythene cover/bag.
• Do not store objects such as side rails or
bed ends on top of the mattress.
Steps to prepare the system for storage:
•
Detach the control unit from the mattress.
• Place the control unit on the mattress.
• Roll the mattress from the head end to the
foot.
• Place the system in a protective bag for
storage.
6.3 Pre-use Checks
• Assess the mattress for any damage which
may have been caused during transit.
• Ensure the mattress is suitable for the
product combination (bed platform, side
rails etc.).
• A comprehensive risk assessment should
be carried out to ensure the mattress is
suitable for the patient, the surrounding
environment and compatibility with the bed.
• The Hybrid-Power is a full replacement
mattress, remove all existing mattresses
and place the new mattress directly on to
the bed frame.
• Ensure the mattress is suitable for the
intended patient and maximum patient
weight.
• It is important the patient can either
reposition themselves or are repositioned
on a regular basis; please follow
local policies, recognised national or
international guidance.
• If stored in a cold area, remove all
packaging materials and allow the system
to lie flat in a room with an approx.
temperature of 22°C for a minimum of 2
hours before use.
6.4 Damage Prevention
Avoid puncturing the cover as this will allow fluid
ingress and ultimately contaminate the mattress.
To prevent damage to the cover:
• Remove all packaging with care.
• Do not place sharp objects such as
hypodermic needles or scalpels on to the
mattress.
• Avoid wearing protruding jewellery such as
rings with large stones or watches.
• Take extra care when using medical
devices such as drip stands, side rails or
transfer boards.
• Do not remove the mattress from
the bed frame if the patient is still
on the mattress - Risk of falling.
• If it is essential that the patient is
moved whilst remaining on the
mattress, ensure the system is
immediately plugged back in to
the mains power supply once
relocated - Risk of tissue damage.
To prevent the risk of cross infection,
when removing a mattress system after
use ensure that all activities in relation
to the mattress are carried out using
disposable gloves unless it can be
verified that the mattress and control
unit has been suitably cleaned and
disinfected prior to collection.
On the return of a mattress system
after use, prior to putting into
storage ensure it has been cleaned
and disinfected in line with the local
infection control policy and/or as
defined in these instructions for use.