DEVIlink™ CC
17
Installation Guide
4�8
Adding room devices - battery powered
Add the battery powered room devices room by room.
4�9
Performing network test
After finishing the installation perform a network test to
ensure that communication between all added devices and
the DEVIlink™ CC is stable.
Note!
Do not perform the network test before the
DEVIlink™ CC is mounted in its final position and connected.
Ensure that all living connects (if any) are out of mounting
mode, see specific instructions following the living connect.
1. Turn off the battery pack.
2. Slide the DEVIlink™ CC onto
the previously installed
mounting plate.
3. The DEVIlink™ CC will now
power-up.
4. Remove the front cover and press the [
SETUP
] pin for
3 seconds to enter the service area.
If there is uncertainty about the network performance, it is
recommended to perform a network test before the instal-
lation is completed entirely.