When a message appears
8
ineo 163/213
8-21
8.4
Main error messages and their remedies
Message
Cause
Remedy
PAPER JAM
OPEN 1st SIDE COVER
A paper misfeed occurred in
the machine.
Open the cover at the indicated
location, and then remove the
misfed paper. Refer to "When
the message "PAPER JAM"
appears" on page 8-6.
All misfed paper was not re-
moved from inside of the ma-
chine.
Open the cover at the indicated
location, and then remove all
misfed paper. Refer to "When
the message "PAPER JAM"
appears" on page 8-6.
ORIGINAL DOC.JAM
OPEN DOC.FEED COVER
A document misfeed occurred
in the document feeder. All
misfed paper was not removed
from the document feeder.
Open the cover at the indicated
location, and then remove the
misfed paper. Refer to "When
the message "ORIGINAL DOC.
JAM" appears" on page 8-18.
REMOVE PAPER
IN BYPASS TRAY
Paper remains in the manual
bypass tray.
Remove the paper from the
manual bypass tray.
FRONT COVER OPEN
CLOSE FRONT COVER
The front door of the machine is
open or not securely closed.
Securely close the front door of
the machine.
DUPLEX COVER OPEN
CLOSE DUPLEX COVER
The duplex unit cover is open
or not securely closed.
Securely close the duplex unit
cover.
DOCUMENT COVER OPEN
CLOSE DOCUMENT COV-
ER
The document feeder is raised
while a document is loaded into
it.
Securely close the document
feeder.
DOC.FEED COVER OPEN
CLOSE DOC.FEED COVER
The misfeed-clearing cover of
the document feeder is open.
Securely close the misfeed-
clearing cover.
TONER EMPTY
SUPPLY TONER
The toner is empty.
Copying/printing cannot be
performed.
Replace the toner bottle with a
new one. Refer to "Replacing
the toner bottle" on page 8-4.
PAPER EMPTY
LOAD PAPER (#XXX)
The selected paper drawer has
run out of paper. "#" indicates
the paper drawer, and "XXX"
indicates the paper size.
Load paper of the specified
size into the specified paper
drawer.
SET ORIGINAL TO ADF
A document was not loaded
into the document feeder be-
fore beginning a copy function
(such as, "Mixed Original" cop-
ying) that uses the document
feeder. Otherwise, the docu-
ment feeder is raised.
Load a document into the doc-
ument feeder.
REMOVE ORIGINAL IN
ADF
When interrupting a copy job to
perform a different copy opera-
tion other than the "BOOK
SEPARATION" function, the
document for the interrupted
copy job was left in the docu-
ment feeder.
Remove the document from the
document feeder.
Summary of Contents for ineo 163
