Develop ineo 163 User Manual Download Page 144

Page: 144 / 342

Making copies

5-46

ineo 163/213

Use the keypad to type in "180" for the width (Y), and then press the
[OK] key.

–

The paper width (Y) can be set between 90 mm and 297 mm.

The BYPASS PAPER SETTING menu appears again.

Check that "MEDIA: PLAIN" appears in the third line of the screen.

–

If any paper type setting other than that for plain paper is selected,
select "MEDIA", and then select "PLAIN".

Press the [

] or [

] key until "RETURN" is selected, and then press the

[OK] key.

The main screen appears.

BYPASS PAPER SIZE

Y=180( 90-297)

X=250(140-432) x

BYPASS MEDIA TYPE

TRANSPARENCY

PLAIN

CARD

BYPASS PAPER SETTING

MEDIA:PLAIN

RETURN

SIZE:[250/180]

Summary of Contents for ineo 163























































































































































































































































































































































Search results

Summary of Contents for ineo 163

Reviews:

Brands by name

Popular brands

Develop ineo 163, User Manual

Search results

Summary of Contents for ineo 163

Reviews:

Brands by name

Popular brands