Develop ineo 163 Page 31 User Manual Download

Page: 31 / 342

Installation and operation precautions

ineo 163/213

2-7

Power plug

WARNING

Ignoring this warnings could cause serious injury or even death.

Do not ignore this safety advices.

CAUTION

Ignoring this cautions could cause injury or damage to property.

Do not ignore this safety advices.

Grounding

WARNING

Ignoring this warnings could cause serious injury or even death.

Do not ignore this safety advices.

Warning

Symbol

• Do not unplug and plug in the power cord with a wet hand,

as an electrical shock could result.

• Plug the power cord all the way into the power outlet. Failure

to do this could result in a fire or electrical shock.

Caution

Symbol

• Do not tug the power cord when unplugging. Pulling on the

power cord could damage the cord, resulting in a fire or elec-
trical shock.

• Remove the power plug from the outlet more than one time a

year and clean the area between the plug terminals. Dust that
accumulates between the plug terminals may cause a fire.

Warning

Symbol

• Connect the power cord to an electrical outlet that is

equipped with a grounding terminal.

Summary of Contents for ineo 163























































































































































































































































































































































Search results

Summary of Contents for ineo 163

Reviews:

Related manuals for ineo 163

Brands by name

Popular brands

Develop ineo 163, User Manual

Search results

Summary of Contents for ineo 163

Reviews:

Related manuals for ineo 163

Brands by name

Popular brands