Motion Sensor - MOSZB-130 – Technical manual
Develco Products A/S
Olof Palmes Allé 40
http://develcoproducts.com
DK-8200 Aarhus N
7
2
Features
2.1
Motion Sensor – MOSZB-130
The device enables you to detect movement and light as well as measuring temperature.
The sensor is battery powered and can be mounted in four different ways: flat on the wall, flat on the ceiling, in the
corner (using a 45° bracket), or standing (on a shelf, table, or similar).
The sensor has 3 ZigBee end points, one for each sensor. The Occupancy end point contains 2 logic modules that
combines’ Occupancy with temperature and light sensor. Each end point can be used separately. Standard ZigBee
ZCL “Configure Reporting” on change and on time is supported.
2.1.1
IAS Zone
The IAS Zone sensor is PIR based, sensing moving objects up to 6 meters from the sensor. The off-time is
adjustable remotely via ZigBee. The end point is configured as Home Automation profile „IAS Zone“. The IAS Zone
End point is less sensitive than the Occupancy sensor endpoint. Therefore if the device is used as an alarm sensor
the IAS Zone end point shall be used.
2.1.2
Occupancy
The occupancy sensor is PIR based, sensing moving objects up to 6 meters from the sensor. The off-time is
adjustable remotely via ZigBee. The end point is configured as Home Automation profile „Occupancy Sensor“.
2.1.3
Light
The light sensor is a low-accuracy sensor reporting light level. The end point is configured as Home Automation
profile „Light Sensor“.
2.1.4
Temperature
The temperature sensor measures temperature with a resolution of 0.1°C. The end point is configured as the Home
Automation profile „Temperature Sensor“.
2.2
Key features
Key features are:
Alarm Sensor – IAS Zone
Temperature sensor
Occupancy sensor
Light sensor
ZigBee OTA cluster for firmware upgrades
ZigBee HA 1.2 Certified application profile
Communication based on DevCom07 ZigBee Module.
RoHS compliant according to the EU Directive 2002/95/EC.
Standard ZigBee Home Automation security and stack settings are used.
