3
IMPORTANT
:
To avoid risk of injury, DEVDEEP SOLAR strongly recommend the services of a qualified
professional who is trained in occupational health and safety procedures, to clean solar
electricity panels.
Introduction
Congratulations on the purchase of your solar electricity system. Not only are you protecting
yourself from current and future price rises of electricity, you are also saving significant CO2
emissions which helps reduce global warming and climate change.
Your system is designed to meet all Indian Standard conditions, regulations and codes. Although
it is very low maintenance, it must always be remembered that the system generates electricity and
we strongly recommend that you do not attempt to service it yourself unless you are suitably qualified.
Your safety is our primary concern
.
Owner Safety for Maintenance
For your safety, we recommend that you do not attempt any servicing yourself unless you are
suitably qualified.
The solar panels work best when clean. Regular rainfall or washing with a hose will maintain their
cleanliness. If they do become excessively soiled they can be cleaned with cold water. DEVDEEP
SOLAR strongly recommend that you avoid climbing onto the roof and use the services of a qualified
professional who is trained in occupational health and safety procedures.
Shading of the solar panels will affect efficiency and performance. Plant and tree growth that may
cause shading at various times of the year, should be monitored and dealt with as required. Likewise,
leaves, bird droppings and other debris coming to rest either on or around the solar modules should
be carefully removed.
If you notice your system is not operating correctly, please check the
TROUBLE SHOOTING
chapter on page 7 and if necessary call 9726879009 immediately and we will help you to diagnose
your problem and can arrange to send a technician to resolve it if necessary. If you need to shut
down the system, please follow these steps in this order–
1.
Switch OFF the
Solar Supply Main Switch
in the Main Switchboard or Meter Box
2.
Switch OFF the
AC Isolator and DC Isolator
adjacent to the Inverter
Following these steps will safely isolate the solar array. To switch it back on, you simply reverse the
procedure.
Always remember that your system will be generating electricity during daylight hours and care
should always be taken to eliminate the risk of electric shock. Refer to the
OPERATING INSTRUCTIONS
on page 5 for more information.
