5
IMPORTANT NOTE:
Disclaimer of Liability: Despite the Instructions and Recommendations provided in this Manual,
the Actual use and maintenance of the Solar Power System is beyond the control of DEVDEEP
SOLAR. Therefore, DEVDEEP SOLAR does not assume any responsibility and expressly
disclaims Liability for Loss, Damage or Expense associated in any Way with the Installation,
Use, or Maintenance of the Solar Power System.
Operating Instructions
Your solar electricity system is designed for automatic operation without need for user
intervention. There are no moving parts or need for the owner to interact with its operation.
In the case of
Mains Grid Supply Failure
the Inverter will immediately and automatically be
disabled. This is known as
“anti-islanding”
and it protects linesmen from an electric shock from
your system when they assume the grid is “dead”. Once the grid power has been restored, the
Inverter will be automatically re-enabled.
If you notice your system is not operating correctly, please check the
TROUBLE SHOOTING
chapter on page 6 and if necessary call 9726879009 Immediately and we will diagnose your problem
and send a technician to resolve it if necessary.
Operating Safety Instructions
•
Do not Attempt to Service the system unless you are
Fully Qualified
to do so. To service any
Electrical connection you have
MUST
be a Licensed Electrician.
•
All Service work must be carried out in strict compliance with all Local and National Electrical
Regulations and Standards.
•
Review and follow all Safety Instructions supplied with all components of your DEVDEEP
SOLAR
electricity
system.
Further
information
can
be
found
at
http://www.devdeepelectricals.com
•
Do not Attempt to Clean or Come in contact with the surface of a solar module with broken
glass. This could result in a Dangerous Electric Shock.
•
Be Aware that power may be present at any point in Electrical Circuits despite the Opening of
Circuit Breakers or Isolators.
•
Circuit Breakers can trip Automatically if problems occur. If the circuit breaker is switched
back to the closed or “on” position and it immediately trips back to the open or “off” position
there is a problem.
•
Appropriate Precautions must be taken when working on rooftops or at heights in accordance
with Local and National occupational health and safety regulations.
