- 30 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
To set up an SMS notification, the following must be fulfilled:
• the [SMS] button in the Notifications for the alarm must be enabled;
• SMS notification must be enabled for the entire Telemetry Port;
•
GSM modem must be connected and enabled in
Settings> Device> GSM Modem
To set up a GPO notification, the following must be fulfilled:
• the output must be selected from the [GPO] button in Notifications for the alarm;
• GPO notification must be enabled for the entire Telemetry Port;
•
the Alarm Output function must be set for the respective output in
Settings> Device> GPO
.
(see “General-Purpose Outputs” on page 19)
The alarm thresholds are used to highlight signal values. If the alarm is not enabled, the threshold
pass is still registered with the highlighting of the signal.
The alarm can be enabled without any Notifications being selected. In this case, the main screen will
show the abnormal signal in the alarm indicators field but will not send any activation notifications.
When both the alarm and the Notifications are enabled, upon activation of the alarm a notification
will be sent and there will also be an indication on the main screen.
