background image

12

13

MAINTENANCE & STORAGE

WIRING DIAGRAM

Illustration 7

CUTTER SPINDLE BRAKE (Adjustment):

• Before replacements of the belts and associated parts turn engine off and pull spark plug lead 

off spark plug.
• Be careful during adjustment of the mower to prevent entrapment of the fingers between moving 

blades, pulleys and fixed parts of the mower.

• Loosen nut holding brake lever stop to chassis and slide forward until brake pad prevents cutter pulley from 

rotating when cutters are disengaged.
• Make sure brake pad is clear of cutter pulley when engaged.
• Tighten nut holding brake lever stop to chassis.

!

CLUTCH ADJUSTMENT FOR TRANSMISSION:  

(See Illustration 6)

• Loosen nut “C” and tighten nut “B”.
• Make sure belt is entirely free when clutch lever is disengaged.
• DO NOT OVER-TIGHTEN BELT.

BLADES:

• Before any inspection or replacements of the blades and associated parts turn engine off and 

pull spark plug lead off spark plug.
• Be careful during adjustment of the mower to prevent entrapment of the fingers between moving 

blades and fixed parts of the mower.

• It is important that you visually inspect the blades, bolts and nuts to ensure that they are in a safe operating 

condition; this should be done before each mowing period.
• Always replace blades and bolts in kit form as to prevent any vibrations that may damage the mower and cause 

personal injury.

!

Illustration 5

HONDA GXV390 UT1 DAEU

Item

Part No.

Part Description

1

1261

Key Switch

2

1368

Battery lead 330mm

3

1373

Battery lead 250mm

4

R322

Loom assembly

5

H315

Battery 12 Volts

WARNING: Incorrect wiring may result in damage to the engines electrical system. Only qualified 
and or competent electrical technicians should attempt any repairs or alterations.

   -

2

 

7

+

3

 4

BLUE

RED

RED

 

8

I

B

  I

G

GREEN

   

I

S

I

M

  I

L

BLACK

1

5

Summary of Contents for H660-II












Reviews: