background image

WARRANTY POLICY

•  DEUTSCHER  MOWERS  PTY.  LTD.  Will  warrant  the  repair  or  replacement,  free  of  charge,  any  parts  of  the 

mower, that are defective in materials or workmanship or both for a period of:

24 months from the date of purchase.

• This does not cover normal ware abuse or incorrect service procedures as set out in the owner’s manual. Parts 

such as blades, blade bolts, tyres and v-belts, which can be subjected, to use beyond their normal intended 

working capacity are also excluded.

• This warranty is void if parts other than genuine have been used or if repairs or modifications have been made 

without the manufactures written authority.

• This warranty does not obligate the manufacture, agents or dealers to cover transport costs incurred in the 

repair or replacement of any defective part.

• The engine on this mower is covered by the engine manufactures warranty supplied with the mower. For your 

nearest engine dealer, Phone:   Briggs & Stratton: 1800 650 042

         

           

 

Honda M.P.E.: 1800 241173

All claims to be referred to your local authorised dealer

FOR YOUR RECORD

Model: 

 

 

 

H660 

 

 

Serial Number:  

 

 

Date of Purchase:

Mower Purchased From:

Remember:  Proof  of  purchase  is  the  responsibility  of  the  owner  and  is  necessary  prior  to  warranty 
work being under taken. An authorised dealer using genuine spare parts must carry out repairs or your 
warranty will be void.

Manufactured in Australia by: 

DEUTSCHER MOWERS PTY LTD

, 711 Creswick Road, Ballarat 3350

Part No. 17558 

Edition: 1       June 2007

Telephone :  03  5339 5708     Fax:  03 5339 3189      www.deutschermowers.com.au

Summary of Contents for H660-II












Reviews: