background image

4

5

ASSEMBLY INSTRUCTIONS

SAFETY INSTRUCTIONS

ENGINE PREPARATION 

(Pre delivery)

1. Remove the dipstick and add oil as per the instructions in the engine manual.

2. Add unleaded petrol to the petrol tank.

3. Follow the starting procedure listed below, and check there are no abnormal vibrations, and that the gear 

lever, forward drive lever, height adjustment lever and blade clutch are functioning satisfactorily. 

Fig. 2 - Fuel Tank Attachment

BEFORE STARTING:

•  Know  your  controls.  Read  the  owners  manuals  thoroughly.  Learn  how  to  stop  the  engine  quickly  in  an 

emergency.

• Inspect the area to be mown, remove all debris and obstacles that may be in the path of the mower. Do not 

attempt to shift obstacles while mower is going.

• Damaged blades and worn bolts are major hazards. Before starting, always visually inspect to see that blades, 

blade bolts and cutter assemblies are not worn or damaged. 

• Replace worn or damaged blades and bolts in sets top preserve balance.

• Refuel outdoors only. Do not smoke while refuelling engine. Add fuel before starting the engine. Never remove 

cap off the fuel tank or add petrol while the engine is running or the engine is hot. If petrol is spilled, do not 

attempt to start the engine but move the machine away from the area of the spill and avoid creating any source 

of ignition until the petrol vapours have dissipated.

• Do not allow children or people unfamiliar with these instructions to use the mower.

• With prolonged use, hearing protection should be worn.

• Never mow while barefoot or wearing open sandals, or thongs. Wear long trousers and heavy shoes.

• Apply sunscreen; wear appropriate clothing, a hat and sunglasses to avoid sunburn.

• It is advisable to wear suitable eye protection when operating the mower.

!

STARTING:

• Disengage all blades and drive clutches and shift gear lever into neutral before starting the engine. 

• Start the mower carefully according to instructions and with feet well away from blades and not in front of the 

discharge chute.

OPERATION:

• Never mow while people, especially children, or pets are nearby.

•  Mow only in daylight or in good artificial light. Stay alert for holes in the terrain and other hidden hazards.

• Never direct discharge of material towards bystanders.

• Avoid operating the equipment in wet grass, where feasible.

• Do not put hands and feet near or under rotating parts. Keep clear of the discharge opening at all times.

• Never pick up or carry a mower while the engine is running.

M

L

K

L

Attach throttle lever here.

tab

Summary of Contents for H660-II












Reviews: